Hebei Jiatuo Friction Material Co., LTD. : Daily maintenance of automobiles (2)
Description：A, cleanThe air contains a lot of dust, silt and acid substances, not only easy to be leakage of fue....
A, clean
The air contains a lot of dust, silt and acid substances, not only easy to be leakage of fuel adhesion, baking in high temperature is easy to form a hard insulation layer, so that the heat dissipation performance of the parts is poor, but also easy to be electrostatic absorption of the car body and erosion of the paint surface, so that its premature fading.
1, clean air filter
The air filter is too dirty to prevent fresh air from entering the cylinder, resulting in excessive concentration of gas, incomplete combustion, power reduction, and exhaust exceeding the standard. Modern air filters generally use paper filter elements, cleaning attention: do not wash with water or oil, should use the patting method and blowing method. The tapping method is to gently pat the end face of the filter element to make the dust fall off. Blow washing method is to blow out from inside the compressed air filter element, air pressure: force should not exceed 0.3n /Pa
This paper is organized by Hebei Jiatuo Friction Material Co., LTD
